HOW TO MAKE SMALL TOY ROBOTS
Instructions BY JOBIN CS
Things You’ll Need:
1) Soldering iron
2) Solder wire
3) Foam tape
4) Pager motor
5) Watch battery
6) Head of a toothbrush
Make a toy robot from a toothbrush
Step1: Remove the head of the toothbrush with a pair of wire clipers or metal cutter scissors.
Step2 : Cut the bristles on the brush to be the same length.
Step3 : Solder some wire leads to the back/ input of the pager motor.
Step4: Attach foam tape to the back of the toothbrush head. Connect the motor to the front of the toothbrush, so that the wire leads run down the length of the toothbrush head.
Step5 : Bend one of the leads downward so that it sticks to the foam tape.
Step6 : Place your battery in between the leads and set your completed robot down on a flat counter surface.
YOUR TOY ROBOT IS REDDY
TANKYOU
2 comments:
Dear Friend,
I apreciate you for your decision to start a blog and share some ideas. Look your ideas are not clear thats why nobody is not interested to your blog. So clear your ideas with the help of some pictures. You have some ideas and you sharing with others, so your posting must be user friendly. it must be as simple as possible. Look don't stop posting, go ahead with your ideas, somebody will read and comment.
Dear Friend,
Include some photos (step-by-step) for easy readiness..Good luck and keep posting.
Post a Comment